Shipbuilding and Repair Quality Standard(کشتی سازی و استاندارد کیفیت تعمیر)

مجموعه استاندارها برای کنترل کیفی تعمیر کشتی

این فایل pdf در 60 صفحه تنظیم شده است .

Part A Shipbuilding and Repair Quality Standard for New Construction
Part B Repair Quality Standard for Existing Ships
PART A - SHIPBUILDING AND REPAIR QUALITY STANDARDS FOR NEW CONSTRUCTION
1. Scope
2. General requirements for new construction
3. Qualification of personnel and procedures
4. Materialss
5. Cutting
6. Fabrication and fairness
7. Alignment
8.  welding
9. Repair
REFERENCES
IACS “Bulk Carriers - Guidelines for Surveys, Assessment and Repair of Hull Structure . 1”
2. TSCF “Guidelines for the inspection and maintenance of double hull tanker structures”
3. TSCF “Guidance manual for the inspection and condition assessment of tanker structures”
4. IACS UR W7 “Hull and machinery steel forgings”
5. IACS UR W8 “Hull and machinery steel castings”
6. IACS UR W11 “Normal and higher strength hull structural steel”
7. IACS UR W13 “Allowable under thickness tolerances of steel plates and wide flats”
8. IACS UR W14 “Steel plates and wide flats with improved through thickness properties”
9. IACS UR W17 “Approval of consumables for welding normal and higher strength hull structural steels”
10. IACS UR Z10.1 “Hull surveys of oil tankers” and Z10.2 “Hull surveys of bulk carriers” Annex I
11. IACS Recommendation No. 12 “Guidelines for surface finish of hot rolled plates and wide flats “

13. IACS Recommendation No. 20 “ Guide for inspection of ship hull welds”. IACS Recommendation No. 20 “ Guide for inspection of ship hull welds”