High Performance Epoxy Laminating System(عملکرد بالا سیستم اپوکسی لمینیت)

RESOLTECH 1040 - (1045N~1048N)
Advanced epoxy laminating system formulated to manufacture high performance lightweight structures with glass, carbon, aramid and basalt fibers with or without post-curing. This new generation system, optimized with a low reactivity, low viscosity and excellent air release properties, is suitable for the manufacture of large structures and composite parts by contact, infusion and injection moulding while guaranteeing low toxicity working conditions to the user and ease of use thanks to its high wetting properties.
It features an adjustable working time from 20mn to 3 hours and 20 minutes with two hardeners that can be pre-blended together to precisely adjust the pot life thanks to their identical mixing ratio of 100:30 and perfect compatibility. It is possible to release the parts from the mould without post-curing. The maximum thermo-mechanical properties of the laminate will be obtained after a post-curing cycle to obtain a final TG of 92°C to 97°C. Nevertheless, a post cure is not mandatory depending on the final use of the parts.